CMC-W718

HRC 28- 30

0.2 , 0.3 , 0.4 , 0.5

For welding Injection thermosetting plastic injection die, good performance at cutting and machining.

CMC-W 718H

HRC 30-33

0.2,0.3,0.4,0.5

Laser welding wire applied to plastic injection mold. After welding, the molds machining is good, materials are uniform with high purity, and good optical activity and corrosion.

CMC-W2738

HRC 32-35

0.2 0.3 0.4 0.5

Laser welding wire used for welding plastic injection mold, heat-resistance mold. Excellent processing ability, easy to cut, polish, excellent electric erosion and engraving ability.

CMC-W P20

HRC 30

0.2 , 0.3 , 0.4 , 0.5

Injection thermosetting plastic die, heat-resisted die, casting copper die.

CMC-SKD11-3

Hardness:HRC56~58

mn 1.0 , 1.2 , 1.6 , 2.4 , 3.2 inch 3/64 , 1/16 , 3/32 , 1/8

For welding cold work steels, punch die, cut die, industrial knives, forming dies, harden surface of work piece.
This is a sort of high hardness, grinding-resisted, good toughness Argon filler rod.

CMC-SKD61-2

Hardness:HRC52~57

mn 1.0 , 1.2 , 1.6 , 2.4 , 3.2 inch 3/64 , 1/16 , 3/32 , 1/8

For welding hot forging die, hot cut die, hot punch die, hot formation die, hot work tool, steel casting die.

CMC-SKD61

Hardness:HRC42~46

mn 0.9 , 1.2 , 1.6 , 2.4 inch 3/64 , 1/16 , 3/32

For welding Aluminum & Copper casting die. Extrudsion dies.
Well heat-resisted, grinding-resisted, crack-resisted.

CMC-SKD61-42

Hardness:HRC42~48

mm 1.6 , 2.4 , 3.2 inch 1/16 , 3/32 , 1/8

For welding hot forging die, Aluminum & Copper hot forging die, Aluminum & Copper casting die.
Well heat-resisted, grinding-resisted, crack-resisted.

CMC-E30N

mn 2.6 , 3.2 inch 1/8

For dissimilar-metal joint and underlay build-up of hard surfacing.

CMC-E45

HRC 48~52

mn 2.6 , 3.2 , 4.0 inch 1/8 , 5/32

A kind of middle hard steel welding electrode, be suitable for air cooling steel and cast iron such as ICD5, 7CrSiMinMoV and so on. Applied to welding the drawing parts of vehicle sheet metal covering part die and large hardware sheet metal stamping die, also suitable for hard surface making.

CMC-E47N

HRC 44~50

mn 2.6 , 3.2 inch 1/8

Rod welded directly in cast iron. It will be easy to in the edge of cast iron die and part of extending and pressing.

CMC-E58

HRC 57~59

mn 2.4 , 3.2 , 4.0 inch 3/32 , 1/8 , 5/32

Be suitable for cool working steel damage surfacing, especially for cutting angle and sideline of cold forging die, knife-die, automotive stamping die, hardware stamping die. For the production of cut tools, also can be surfacing as a shear edge by welding to low-alloy or ordinary steel. Can also be applied to wearing resistance parts¡¦ hard surface making.