CMC-E30N

mn 2.6 , 3.2 inch 1/8

For dissimilar-metal joint and underlay build-up of hard surfacing.

CMC-E45

HRC 48~52

mn 2.6 , 3.2 , 4.0 inch 1/8 , 5/32

A kind of middle hard steel welding electrode, be suitable for air cooling steel and cast iron such as ICD5, 7CrSiMinMoV and so on. Applied to welding the drawing parts of vehicle sheet metal covering part die and large hardware sheet metal stamping die, also suitable for hard surface making.

CMC-E47N

HRC 44~50

mn 2.6 , 3.2 inch 1/8

Rod welded directly in cast iron. It will be easy to in the edge of cast iron die and part of extending and pressing.

CMC-E58

HRC 57~59

mn 2.4 , 3.2 , 4.0 inch 3/32 , 1/8 , 5/32

Be suitable for cool working steel damage surfacing, especially for cutting angle and sideline of cold forging die, knife-die, automotive stamping die, hardware stamping die. For the production of cut tools, also can be surfacing as a shear edge by welding to low-alloy or ordinary steel. Can also be applied to wearing resistance parts¡¦ hard surface making.

CMC-E60A

HRC 60~62

mn 2.6 , 3.2 inch 1/8

Excellent stability of hardness, heat/tearing/wearing-resisted, be suitable to medium carbon steel, hard surface making of low alloy steel, welding wearing/tearing-resisted work piece and industrial knives, automobile die, welding hot work die, cold work die, launching die, crushing die.

CMC-E7w

HRC 53-55

mn 3.2 , 4.0 inch 1/8 , 5/32

Suitable for welding of cast iron (ICD5) or knife-edge of steel production and damage. especially suitable for the production of automotive sheet metal cutting edge, punching, flanging position, light sheet metal stamping die angle of the side. For the production of cut tools, also can be surfacing as a shear edge. Can also be applied to wearing resistance parts¡¦ hard surface making.